Avaya S8700 Maintenance Manual page 567

status conference
Ext
Meet-me number
Dial Type
In Use
Chl
555-233-143
Endpoint extension chosen at administration. This field is blank.
The Meet-Me Number administered for the Meet-Me Extension. This field
is blank.
Indicates whether dial-in or dial-out is used to join the endpoint to the
conference - in , out . The value
Is the endpoint currently participating in the conference or in process of
connecting to the conference? -
y means that the endpoint is in use and is fully connected on all media
in an active conference.
means that the endpoint is in use and is fully connected, however the
c
endpoint has changed the conference audio or video capability or has
changed the rate of the conference because of rate adaptation. This
condition requires analysis of this endpoint's capabilities and mode
fields to identify which capability was reduced.
means that the endpoint is in use but the endpoint had capability
e
problems. The endpoint does not have one of the required capabilities
(Vid, Bhl, MLP) to be a full participant. For MLP capabilities, see the
"T120" field. This condition requires analysis of this endpoint's
capabilities and mode field to identify the missing capability.
means that the endpoint is in use but is not connected to all media.
f
This indicates that the endpoint has declared every required capability
(channel/video/audio/data) but is not fully connected to all conference
media at this time. This endpoint may be in the process of connecting,
has failed to connect, or is not a valid video source. This condition
requires analysis of this endpoint's capabilities and mode fields to
identify the problem.
means that the endpoint was connected in a conference but has/was
n
disconnected or attempted to connect to a conference but was
unsuccessful.
means the field is blank until the first call is made from/to the
blank
endpoint.
Data on the quantify and quality of channels (transfer rate)? -
blank
the endpoint has the required number of channels.
y
e means that the endpoint has not declared support for the correct
number of channels and cannot participate fully in the conference.
n means that the endpoint has declared the correct number of
channels, but every channel has not yet joined the conference, due to
either a network or endpoint problem.
blank Audio add-on endpoints always have the Chl field set to
.
blank
in is for dial-in, and out
, , , , , .
y c e f n blank
Issue 1 May 2002
is for dial-out.
y , e , n ,
7-311