Avaya S8700 Maintenance Manual page 367

display errors
display errors
display errors [high-resolution] [print | schedule]
The display errors command brings up an input form that allows you to select
which errors will be displayed on the hardware error report.
Errors can result from in-line firmware errors, periodic tests, failures detected
while executing a test command, software inconsistency, or a data audit
discrepancy. The error log is restricted in size. A new entry overwrites the oldest
unalarmed entry. The overwritten entry must be at least six minutes old, or the
new entry is dropped.
Help Messages
The following help message will be displayed when the first page of a
multiple page list of alarms/errors or after the
Press CANCEL to abort or NEXT PAGE for next page
The following help message will be displayed after the
pressed and there are more pages of alarms/errors to be displayed:
Press CANCEL to abort, NEXT PAGE for next page, PREV
PAGE for previous page
The following help message will be displayed after the
pressed and there are no more alarms/errors to be displayed:
Press CANCEL to abort, NEXT PAGE to complete, PREV PAGE
for previous page
Actions
The following command will display the next page of alarms/errors or echo
"Command successfully completed" and exit if there a no more pages of
alarms/errors to display:
The following command will display the previous page of alarms/errors and
the "press CANCEL to abort or NEXT PAGE for next page" help message:
The following display command will be cancelled and echo "Command
aborted" and exit.
555-233-143
Next Page
Prev Page
Cancel
key is pressed:
Prev Page
key is
Next Page
key is
Next Page
Issue 1 May 2002 7-111