Test Board - Avaya S8700 Maintenance Manual

Maintenance Commands

test board

test board UUCSS [short | long] [repeat# | clear] [schedule]
The test board command will validate that the board exists at the specified
location. Based on the logical type (for example, Analog, Digital, Hybrid) of board
a series of tests will be executed. Each individual test will exercise diagnostics on
the board and then return results of the test along with any possible error codes.
Destructive long tests on a Switch Node Interface (SNI) board are not allowed
unless the board has been busied out.
For more information, see the following sections:
on page 7-6
The following display shows a typical result when test board 1D07 is entered and
slot 1D07 hods a Digital Line circuit pack with 7 ports administered.
test board 1d07 short
Port Maintenance Name
01D07 DIG-BD
01D0701 DIG-LINE
01D0701 DIG-LINE
01D0702 PDMODULE
01D0703 PDMODULE
01D0704 PDMODULE
01D0705 DIG-LINE
01D0705 DIG-LINE
01D0706 DIG-LINE
01D0706 DIG-LINE
01D0707 DIG-LINE
01D0707 DIG-LINE
Command successfully completed
7-420 Issue 1 May 2002
and ''Common Output Fields'' on page
TEST RESULTS
Alt. Name Test No.
52
5401 16
5401 17
5460 17
5461 17
5444 17
16
17
Attd2 16
Attd2 17
Attd1 16
Attd1 17
''Common Input Parameters''
7-9.
Result Error Code
PASS
PASS
PASS
PASS
ABORT 5
ABORT 5
ABORT 1392
ABORT 1392
PASS
PASS
PASS
PASS
555-233-143