Avaya S8700 Maintenance Manual page 953

ATM-INTF (TN2305/6)
Control Channel Loop-Around Test
This test queries the circuit pack for its circuit-pack code and vintage and verifies
its records.
Table 8-98. Test #52: Control Channel Loop-Around
Error Test
Code Result Description / Recommendation
2000 ABORT The response to the test request was not received within the allowable time
period.
2100 ABORT The system resources required to this test are not available.
2500 ABORT Internal system error — Retry the command at 1-minute intervals up to 5 times.
FAIL The circuit pack failed to return the circuit pack code or vintage.
1. Retry the command up to 5 times.
2. If the problem continues, reset the circuit pack.
3. Retry the command up to 5 times.
PASS Communication with this circuit pack is successful.
Any NO This is normal if the test is being executed when:
BOARD
1. The board is not physically in the system.
2. The system is booting.
Otherwise, there is some inconsistency in the date stored in the system.
1. Verify that the board is physically in the system.
2. Verify that the system is not in the process of booting.
3. Retry the command at 1-minute intervals up to 5 times.
555-233-143
Continued on next page
Issue 1 May 2002 8-231