List Fiber-Link - Avaya S8700 Maintenance Manual

Maintenance Commands

list fiber-link

list fiber-link [print | schedule]
NOTE:
This command is not valid for S8700 IP Connect configurations.
This command displays a list of every fiber link in the system. The list is a
summary of data entered on the fiber link form ( add, display, change , or remove
fiber-link ).
Output
The following display shows a typical result when list fiber is entered on a system
with duplicated PNC and 5 EPNs, one of which is DS1C remoted.
list fiber-link
FIBER
LINK #
1
2
3
4
5
6
7
8
9
Command successfully completed
Field Descriptions
FIBER LINK #
TYPE
A-PNC LOC
B-PNC LOC
DS1 CONV
7-170 Issue 1 May 2002
FIBER LINK ADMINISTRATION
- - - ENDPOINT 1- -
TYPE A-PNC B-PNC
LOC LOC
ei 01E01 01D01
ei 02A01 02B02
ei 03A01 03B02
ei 04A01 04B02
ei 05A01 05B02
sni 01E13 01D13
sni 01E09 01D09
sni 01E14 01D14
ei 06A01 06B02
The administered number used to identify the fiber link (1 to 27).
The types of circuit packs that constitute endpoint 1 and endpoint 2 of the
fiber link (ei or sni).
The physical locations (cabinet-carrier-slot number) of the circuit packs that
constitute the endpoints.
In a system with duplicated PNC, the physical location (cabinet-carrier-slot
number) of the circuit packs that constitute the endpoints of the link in the
B-PNC.
Whether or not an endpoint of the link is remotely located by means of a
DS1C Converter complex.
- - -ENDPOINT 1- - DS1
TYPE A-PNC B-PNC CONV
LOC LOC
sni 01E02 01D02
sni 02E02 02D02
sni 01E20 01D20
sni 02E02 02D20
sni 02E03 02D03
sni 02E13 02D13
sni 02E09 02D09
sni 02E14 02D14
sni 01E03 01D03
n
n
n
n
y
n
n
n
n
555-233-143