Avaya S8700 Maintenance Manual page 515

For multi-connect configurations

Hide thumbs Also See for S8700:

Table of Contents

reset pnc interchange

One of the following messages is displayed:

Command successfully completed

If the reset pnc interchange command is unsuccessful due to the standby PNC's

state of health (operation of anti-thrashing), the following message will be

Interchange of pnc failed;

try again using the 'override-and-lock' identifier

See the preceding caution regarding use of the override-and-lock option. If the

reset pnc interchange command is unsuccessful due to a busyout of the standby

PNC, the following message will be displayed:

Must release port network connectivity first

Issue 1 May 2002

Troubleshooting