Avaya S8700 Maintenance Manual page 125

ATM Tips
3. If connections are being rejected, the Last Cause Code may suggest
why. The cause code (in following
on the PPN port even though the EPN port is the one misbehaving, and
vice versa.
Enter show signaling cause causecode on the A500 console.
4-30
A500:show signaling cause 31
Cause 31:
Figure 4-30. A500:show signaling cause 31
4. At the S8700 Multi-Connect SAT type display errors, and press
Set the Error List to errors and Category to PNC on the input screen
(Figure
Table
a TN230X on an EPN). This is successful only if the links between the
PPN and the EPN remain up so that the message from the EPN is logged.
Refer to
information about cause codes for this MO.
555-233-143
shows the screen output for this command.
Normal, unspecified
4-31), and press
Enter
4-6) returned from the ATM network to a TN230X on the PPN (and to
''ATM-BCH (ATM B-Channel Trunk)'' on page 8-168
Table 4-6) indicating the error may be
to display any cause codes (see following
Issue 1 May 2002
Figure
.
Enter
for detailed
4-51