Maintenance Commands
reset ipserver-interface
reset ipserver-interface Uc
This command performs a board reset for an IPSI in the named cabinet/carrier.
This is equivalent to reset board Ucss .
NOTE:
The IPSI must be busied out before a reset is allowed. If you attempt to
send the reset ipserver-interface command without busying out the IPSI, an
error message reminds you. Use the busy ipserver-interface command to
take the IPSI out of service.
Parameters
U
cabinet (1-64)
c
carrier
Examples
reset ipserver-interface 2a
Output
reset ipserver-interface 2a
Port
Maintenance Name
02A
TONE-BD
Command successfully completed
7-260
Issue 1 May 2002
Specify the cabinet number with the board you want to
test.
Supply the carrier you want to test.
TEST RESULTS
Alt. Name Test No. Result
53
PASS
Error Code
555-233-143