Display System-Parameters Maintenance - Avaya S8700 Maintenance Manual

Maintenance Commands
display system-parameters
maintenance
This command displays existing maintenance-related system parameters.
Synopsis
display system-parameters maintenance [high-resolution] [print | schedule]
Permissions
Logins with the following service levels may execute this command: craft, inads,
init, super-user, or logins with Maintain Switch Circuit Packs permissions enabled.
Examples

display system-parameters maintenance

display system-parameters maintenance print
display system-parameters maintenance schedule
Description
The display system-parameters maintenance command displays the
translation data for maintenance related system parameters.
Parameters
Print This option causes the report to be printed if a printer is linked to the SAT.
Schedule When the schedule option is specified, the command is validated and a
schedule form is displayed to allow the technician to schedule execution of the
command at a specified time. The information displayed by the command will be
sent to the system printer instead of the screen.
For more information, see the section:
Output
An input form is displayed with the following fields. Defaults for data entry fields
are listed in parentheses.
The following display shows a typical result when display system-parameters
maintenance is entered on an S8700 Multi-Connect system.
7-144 Issue 1 May 2002
''Common Input Parameters''.
555-233-143