Introduction; Description; Box Contents; Ubex-Pro20-Hdmi-F100 / F110 - Lightware UBEX-PRO20-HDMI-F110 User Manual

 
     

1. Introduction

1. Introduction
1
I ntroduction
Thank you for choosing Lightware's UBEX families extender. In the first chapter
we would like to introduce the device highlighting the most important features
in the following sections:
ç Description
ç Box Contents
ç Features
ç Model Comparison
ç Application Modes
ç Typical Application Diagrams
UBEX series – Extender Application Mode – User's Manual UBEX series – Extender Application Mode – User's Manual
1.1. Description
Lightware's one
the most visionary
development project is
the UBEX (Ultra Bandwidth Extender) product family. This offers a new
optical solution that provides 4K@60Hz 4:4:4 uncompressed signal
extension with extra low latency for the user. It applies packet-based
transmission instead of the conventional method.
We use standard, certified 10 Gbps SFP+ optical modules which
support the hot swap connection, therefore they are interchangeable
by the user without powering off the device. There could be either
duplex multimode/singlemode modules (1–1 fiber for each direction
per 10 Gbps link) or bidirectional singlemode module (1 fiber for both
direction per 10 Gbps link). The maximum supported cable length is
400 m with multimode modules (OM4), and 10 km with short range
singlemode modules, or 80 km with long range singlemode modules.
In a typical application with standard, non-blocking 10 Gbps Ethernet
switch it is necessary to use both directions of the link. Therefore the
number of necessary fibers depends on the link speed and the optical
module: for 10 Gbps 1 or 2 fibers, for 20 Gbps 2 or 4 fibers are needed.
One of the primary advantages of the new architecture is scalability.
Model Denomination
Ultra Bandwidth Extender
ProLine product category
Ultra
Bandwidth
Extender
UBEX-PRO20-HDMI-R100 2xMM-QUAD
ProLine product
category
Applied F-series endpoint firmware package: v1.4.1 | Applied R-series endpoint firmware package: v1.4.1 | LDC software: v1.34.0b2
of
HDMI interface Model number
UBEX-PRO20-HDMI-F110
Fiber (SFP+) interface
20 Gbit/s signal transmission
Neutrik
opticalCON
HDMI interface Model number QUAD connector
R-series model 2x10G multimode
fiber optical
20 Gbit/s signal transmission
interface
About the Serial Number
Lightware devices contain a label indicating the unique serial number
of the product. The structure is the following:
7A000941
6-digit running sequence number
1: Jan
Month of the manufacturing: 2: Feb
3: Mar
Year of the manufacturing: 7=2017
(3-9, A-Y) 8=2018
9=2019
1.2. Box Contents
1.2.1. UBEX-PRO20-HDMI-F100 / F110
UBEX F series IEC power cable
endpoint device
Safety & warranty info, Phoenix Combicon
Quick Start Guide 3-pole connector *
* For UBEX-PRO20-HDMI-F110 model.
INFO:
10GbE singlemode/multimode SFP+ modules can be ordered
separately for the UBEX devices. For the details please contact
sales@lightware.com.
9 9
4: Apr 7: Jul A: Oct
5: May 8: Aug B: Nov
6: Jun 9: Sep C: Dec
A=2020 D=2023
B=2021 E=2024
C=2022 F=2025
UTP patch cable (3 m)
Phoenix Combicon
5-pole connector *