Table of Contents
Advertisement
9.4.10
Background color
Menu
Top→OUTPUT TIMING→BACKGROUND COLOR
Setting for
Each output channel (Common to OUTA / OUTB)
Setting value R / G / B: 0 to 255 [Default] R / G / B: 0 (black)
You can set the background color of output video.
If you set "LINK" to "ON", only the setting for "R" can be set, and "G" and "B" track the setting of "R".
9.4.11
Test pattern
Menu
Top→OUTPUT TIMING→TEST PATTERN
Setting for
Each output channel (Common to OUTA / OUTB)
Setting value [Fig. 9.7] Test pattern
V-COLOR BAR
OFF [Default]
(Norm al video output)
HORIZONTAL
100% WHITE
RAMP
CROSS HATCH OUTPUT FRAME
You can activate the MSD's internal test pattern generator and direct its signal to each output connector.
While active, the test pattern will override any other signal that has been switched to that particular output
connector.
All settings of "9.5 Quality setting" will be invalid while a test pattern is displayed.
"OUTPUT FRAME": Select this pattern if part of image is not displayed on the sink device.
Settings of "9.4.6 Display position" and "9.4.7 Display size" in the output side will be adjusted in order to
display the test pattern on full screen.
For test patterns other than "OUTPUT FRAME": video is output on full screen with the resolution set in "9.4.1
Output resolution" and the settings of "9.4.6 Display position", "9.4.7 Display size" and "9.4.8 Masking"
will be invalid.
You can use the arrow keys ( , ▲, ▼) to scroll through the available patterns "COLOR BAR", "GRAY
SCALE", "RAMP", and "ZEBRA" by using. The scroll speed can be set by 3 pixels per frame up to 30 pixels
per frame with ▲ and ▼ keys. You can check the residual image (resolution of moving picture) by
displaying and scrolling the "ZEBRA" pattern.
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
H-COLOR BAR
50% WHITE
RASTER
RASTER
VERTICAL
STRIPE
[Fig. 9.6] Test pattern
V-GRAY SCALE
H-GRAY SCALE
RED RASTER
GREEN RASTER BLUE RASTER
VERTICAL
HORIZONTAL
ZEBRA
STRIPE
VERTICAL RAMP
HORIZONTAL
ZEBRA
53
Advertisement
Table of Contents
