Aspect Ratio For Sink Device; Aspect Ratio - IDK MSD-702UHD User Manual

9.4.2 Aspect ratio for sink device

Menu Top→OUTPUT TIMING→MONITOR ASPECT
Setting for Each output channel (Common to OUTA / OUTB)
Setting value
・RESOLUTION [Default]
・256:135
You can set the aspect ratio of the connected sink device.
If you select "RESOLUTION," the aspect ratio of the output resolution will be applied. If aspect ratios of the
target sink device and the output resolution are different from each other, you can select an aspect ratio for
the sink device of: "4:3," "5:4," "5:3," "16:9," "16:10," and "256:135" (4096x2160).

9.4.3 Aspect ratio

Menu Top→OUTPUT TIMING→INPUT ASPECT
Setting for Each input channel, each input signal
Setting value
・AUTO-1 [Default]
・AUTO-2
・16:9
・14:9
You can set the aspect ratio for each video input.
If you select "AUTO-1" or "AUTO-2," the aspect ratio is restored automatically to the original ratio according to
the settings of sink device aspect ratio and the MSD's aspect ratio control.
"AUTO-1" and "AUTO-2" work differently only when letter box signals are presented to the input. "AUTO-1"
processes them as 16:9 or 14:9 video signals, while "AUTO-2" sets them as 4:3.
Normally, no problem occurs if you set the aspect ratio to "AUTO-1", but some DVD players and other devices
display subtitles or setup menus in the un-displayed area. In such case, set the aspect to "AUTO-2" to display
the entire area of the video signals.
Setting options of "16:9", "14:9", "4:3", "16:9 / 14:9 LETTER BOX", and "4:3 / 14:9 SIDE PANEL" are
accessible only when TV signals are input. When PC signals are input, the aspect ratio will be restored
automatically according to the aspect ratio of the input signal regardless of the
settings:"AUTO-1", "AUTO-2", "16:9", "14:9", "4:3", "16:9/14:9 LETTER BOX", and "4:3/14:9 SIDE PANEL".
"FULL": video signals are displayed always in full screen mode regardless of input video signal and settings of
"9.4.2 Aspect ratio for sink device" and "9.4.4 Aspect ratio control".
"THROUGH": video signals are displayed always in pixel 1:1 regardless of settings of "9.4.2 Aspect ratio for
sink device" and "9.4.4 Aspect ratio control".
MSD-701UHD / 702UHD / 801UHD/ 802UHD User's Guide
・16:10
・16:9
・4:3
・16:9 LETTER BOX
・14:9 LETTER BOX
・4:3 SIDE PANEL
・5:3 ・4:3
・5:4
【See: 9.4.1 Output resolution】
・14:9 SIDE PANEL
・FULL
・THROUGH
【See: 9.4.2 Aspect ratio for sink device】
【See: 9.4.4 Aspect ratio control】
49