Aspect Ratio Control Of Output Video [Monitor Aspect] - IDK msd-804fd User Manual

7.3.2

Aspect ratio control of output video [MONITOR ASPECT]

This setting will be used to restore the aspect ratio to the normal ratio in "7.3.3 Aspect ratio control of input
video [INPUT ASPECT]".
・RESOLUTION
・4:3
・5:4
If you select "RESOLUTION", the aspect ratio of the resolution selected in "7.3.1 Output resolution
[RESOLUTION]" is applied.
Output resolution
VGA(640×480)
SVGA(800×600)
XGA(1024×768)
WXGA(1280×768)
WXGA(1280×800)
Quad-VGA(1280×960)
SXGA(1280×1024)
If aspect ratio of the target display device and the ratio set in "7.3.1 Output resolution [RESOLUTION]" differ,
you can select an aspect ratio of the display device from "4:3", "5:4", "5:3", "16:9", and "16:10".
1. To select aspect ratio of the display device to be connected using menu:
MSD-804FD
↓ SET key
[FUNCTION SELECT]
OUTPUT TIMING
↓ SET key
[OUTPUT TIMING]
MONITOR ASPECT
↓ SET key
[OUT1 MONITOR]
RESOLUTION
↓ ESC key: Returns to the previous screen
2. To select aspect ratio of the display device to be connected using commands:
@SUM: Set display aspect ratio
@GUM: Get display aspect ratio
・5:3
[Default]
・16:9
・16:10
[Table 7.1] Output resolution and aspect ratio
Aspect
Output resolution
ratio
4:3 WXGA(1360×768)
4:3 WXGA(1366×768)
4:3 SXGA+(1400×1050)
5:3 WXGA+(1440×900)
16:10 WXGA++(1600×900)
4:3 UXGA(1600×1200)
5:4 WSXGA+(1680×1050)
Top
keys: Select "OUTPUT TIMING".
keys: Select "MONITOR ASPECT".
keys: Select the desired monitor aspect.
( RESOLUTION, 4:3, 5:4, 5:3, 16:9, 16:10 )
keys: Select the desired output (OUT1 to OUT4).
52
MSD-804FD User's Guide
For each output (common to OUTA and OUTB
Aspect
Output resolution
ratio
16:9 VESAHD(1920×1080)
16:9 WUXGA(1920×1200)
4:3 QWXGA(2048x1152)
16:10 480i,p(720×480)
16:9 576i,p(720×576)
4:3 720p(1280×720)
16:10 1080i,p(1920×1080)
Aspect
ratio
16:9
16:10
16:9
4:3
4:3
16:9
16:9