3.7 I Module HM-DI320C
The I module is a DI (Digital Input) module with 32 input points.
3.7.1 Specifications
Category
ASIC for Motionnet control
Input count
Input method
Rated input voltage
Working input
Basic
voltage range
specification
DI
Rated input current
specifications
Input resistance
Response time
Input
count/Common
count
Safety feature Overcurrent protection
Power supply
Consumption current
Environment
requirements
Temperature requirement
Module dimensions
(Excluding the connector's
projecting part)
3.7.2 External Appearance
Item
G9002
32 points
Photocoupler-isolated input (TLP280-4 or equivalent)
DC +12V to DC +24V
DC +10V to DC +26V
8mA (For 24V input voltage)
4.28k
1ms or less (Fixed by 1ms H/W filter)
8 points/1 common
A PTC thermistor (poly switch) cuts the current when the current flowing through
its external power supply connector terminal exceeds a certain amount.
DC +12V to DC +24V
Model no.
HMG-I1
HMG-I2
0 to 50 degrees Celsius without dew condensation
Module: Depth 85mm × Height 105mm
Outer dimensions of the frame: Depth 110mm × Height 115mm × Width 14.2mm
Table 3.7-1 I module, HM-DI320C specifications
Internal logic circuit POW ON indicator (Green)
(ON by internal +5V logic circuit POW ON)
Figure 3.7-1 External appearance of I module, HM-DI320C
Specifications
Consumption
current of the
communication
board 24V terminal
560mA
700mA
POW ON indicator (Green) of each of
EXTPOW0 to 3 on the module board
(ON by power supply and normal fuse
at each EXTPOW)
DI32 connector (J1)
71
Remarks
by Nippon Pulse
Motor