Figure 3.5-4 Receiving Terminal Wiring - Hivertec motionCAT Series User Manual

(4) P24-IN Module's DC 24V receiving terminal
● Connect +24V (or 12V) power supply to the receiving terminal.
● Match the connection polarity to the one indicated on the plug (24/G).
● Recommended wire material: AWG20 - 18 (0.5 to 0.9mm
● For fixing cables: Crimp tool YC-630 (JST)
Board-side post: B2PS-VH
A. Post B. Housing (Fixed to the contact)

Figure 3.5-4 Receiving terminal wiring

63
2
stranded wire)
Housing: VHR-2N
Contact: BVH-41T-P1.1