Table of Contents
Advertisement
10. Revision History
Date
Version
2010/05/25
1.0
2010/06/10
1.1
2010/06/23
1.2
2010/06/28
1.3
2011/08/29
2.0
2011/10/24
2.01
2012/07/27
2.10
2012/10/17
2.20
2014/03/20
2.30
2019/07/12
2.31
The first edition
Support for Windows7 by HPCI-MCAT520M
Addition of recognition, connection, and disconnection of HM-GU00T board.
Correction of errors in the HM-D2408T specifications.
Addition of illustration of connector terminal positions for each module.
Revision of configuration. Addition of I, O, S, A, and B module.
Correction of error.
Error: "3.9 O Module (16-OUT)" → Revised to: "3.9 O Module (32-OUT)"
Correction of error.
Error: "Table 3.6-1 W module HM-W100C" → Revised to: "Table 3.6-1 W module
HM-W200C"
Correction of error in "3.5.7 Machine interface"
Error: Input from Servo Drive" → Revised to "Input from Axis Sensor".
Complete revision of the manual.
・Change of address: building name
・Delete contents [6.5 "Getting Started" for HCPCI-MNT720M]
・Delete contents [5.2 HPC104-MCAT110M]
・5. [Installation on Windows 7 and Vista] →[Installation on Windows 7 or later]
win7_x86¥dpinst.exe --> x86¥dpinst.exe
win7_x64¥dpinst.exe --> x64¥dpinst.exe
Contents of revision
157
Advertisement
Table of Contents
