Figure 6.4-11 Operation Parameter Settings - Hivertec motionCAT Series User Manual

(10) Operation parameter settings
For your safety, check operation at a low speed when running the system for the first time.
Used for positioning or reciprocating operation.
Set the travel distance with an absolute value.
(Unit: pulse)
Used as the base speed for FL constant speed
operation and acceleration/deceleration
operation. (Unit: pps)
Used as the operation speed for FH constant
speed operation and acceleration/deceleration
operation. (Unit: pps)
Used for some homing operations. (Unit: pps)
Sets the acceleration time for
acceleration/deceleration operation. (Unit: ms)

Figure 6.4-11 Operation parameter settings

Sets the deceleration time for
acceleration/deceleration operation. (Unit: ms)
Sets the number of reciprocations in reciprocating
operation.
124