(13) Positioning operation
(14) Reciprocating positioning operation
Executes positioning in (+) direction at the specified speed pattern.
Executes positioning in (-) direction at the specified speed pattern.
Positions to command position 0.
Decelerates to stop.
Stops immediately.
Figure 6.4-14 Positioning operation
Executes reciprocating positioning in (+) direction at the specified
speed pattern.
Executes reciprocating positioning in (-) direction at the specified
speed pattern.
Positions to command position 0.
Stops the cycle.
Stops immediately.
Figure 6.4-15 Reciprocating positioning operation
126