External Appearance; Indicator; Figure 3.5-1 External Appearance Of W Module Hm-W200C; Figure 3.5-2 Indicator Led Position - Hivertec motionCAT Series User Manual

3.5.2 External Appearance

3.5.3 Indicator

The W module is provided with an LED that indicates the power supply status.
W module external power
POW ON indicator (Green)
Display item
POW ON indicator
(Green)
Module POW ON indicator
Module's receiving terminal
(P24-IN)

Figure 3.5-1 External appearance of W module HM-W200C

Figure 3.5-2 Indicator LED position

While voltage is applied to the
receiving terminal
While power source is not
connected to the receiving terminal
or current is cut off by poly switch
Table 3.5-2 LED indicator
Connector for axis 1 pulse-motor signals
(J1/Motor1)
Connector for axis 2 pulse-motor signals
(J2/Motor2)
Sensor connector (J3/Sensor)
Status
60
Indicator
Green ON
OFF