P Module Hm-P100C (1-Axis Motion Module); W Module Hm-W200C (2-Axis Motion Module); C Module Hm-C100C (1-Axis Motion Module With Interpolation Function); Figure 6.4-4 P/W/C Module Operation Screen - Hivertec motionCAT Series User Manual

6.4.5 P Module HM-P100C (1-axis Motion Module)
6.4.6 W Module HM-W200C (2-axis Motion Module)
6.4.7 C Module HM-C100C (1-axis Motion Module with Interpolation Function)
(1) Functions
⚫ Set operation parameters for the specified P/W/C module.
⚫ Display the status of the specified P/W/C module.
⚫ Make the specified P/W/C module execute basic operations (continuous feed, positioning, homing,
and/or reciprocating)
(2) P/W/C module operation screen
The P module and W module are both displayed as P100(P) on the TreeView. In addition, the C module
is displayed as C100(C) on the TreeView. W modules are mounted by placing two P100(P) side-by-side,
as if they were two P modules.
The following operation screen displays when P100(P) or C100(C) is selected on the TreeView.

Figure 6.4-4 P/W/C module operation screen

116