Figure 6.4-12 Continuous Feed Operation; Figure 6.4-13 Homing Operation - Hivertec motionCAT Series User Manual

(11) Continuous feed operation
Specify the continuous feed operation to perform by holding the mouse down on the desired button: [+FL
constant speed continuous feed], [+FH constant speed continuous feed], [+accelerated/decelerated
continuous feed], [-FL constant speed continuous feed], [-FH constant speed continuous feed],
[-accelerated/decelerated continuous feed].
The operation stops when the mouse is released.
(12) Homing operation

Figure 6.4-12 Continuous feed operation

Starts the homing operation with the specified method and
speed.
Positions to command position 0.
Decelerates to stop.
Stops immediately.

Figure 6.4-13 Homing operation

125