Fixture Simulator
Converting the Port Impedance of the Measurement Result
Converting the Port Impedance of the Measurement Result
The measured value obtained by using a port impedance of 50 W can be converted into a
measured value at an arbitrary port impedance.
Figure 7-3
Port Impedance Conversion Function
Converting the Port Impedance
Step 1. Press
Step 2. Press
be changed.
Step 3. Enter the port impedance as a numeric value.
Step 4. Repeat Step 2 and Step 3 to specify the port impedance for each port changed.
Step 5. Press
state.
Step 6. Press
Step 7. If
154
-
Fixture Simulator - Port Z Conversion
,
,
Port 1 Z0
Port 2 Z0
Port 3 Z0
to change the port impedance conversion function to the
Port Z Conversion
.
Return
is
, press the key again to turn it
Fixture Simulator
OFF
.
, or
to select the port whose impedance will
Port 4 Z0
.
ON
ON
Chapter 7