Fixture Simulator
Overview of Fixture Simulator
Overview of Fixture Simulator
The fixture simulator is a function that uses software in the E5070A/E5071A to simulate
various measurement conditions based on the measurement results. The six functions are
as follows.
•
•
•
•
•
•
Figure 7-1 shows the data processing flow diagram of the fixture simulator.
Figure 7-1
Data Processing Flow Diagram of Fixture Simulator
Port extension is an independent function from the fixture simulator, but if the fixture
simulator function is on, data processing is automatically executed as a part of fixture
simulator to improve the data processing efficiency. (Measurement result is the same as
150
Network de-embedding
Port reference impedance conversion
Matching circuit embedding
Balance-unbalance conversion
Differential/Common port reference impedance conversion
Differential matching circuit embedding
*1.Option 313, 314, 413, or 414 only.
*1
*1
*1
Chapter 7