Agilent Technologies ENA Series User Manual page 265

Step 9. In the Network dialog box, select
appears. If another computer name is required other than
Name
Figure 12-11 Network Dialog Box ("Identification" Tab)
Step 10. If another network configuration is required, follow the same procedure to configure a
network on a Windows 98Ò PC.
Step 11. Press the
Step 12. Press the
Step 13. The System Settings Change dialog box (Figure 12-12) now appears, press the
to shut down the E5070A/E5071A.
Figure 12-12 System Settings Change Dialog Box
NOTE
The modified network configuration will not take effect until you shut down and restart the
E5070A/E5071A.
Chapter 12
Setting and Using the Control and Management Functions
Identification
box.
button to close the TCP/IP Properties dialog box.
OK
button to close the Network dialog box.
OK
Configuring the Network
tab. The dialog box in Figure 12-11
, set in the
E507X Computer
button
Yes
257