Calibration
OPEN/SHORT Response Calibration (Reflection Test)
Procedure
Step 1. Press
Step 2. Press
Step 3. Select OPEN or SHORT response calibration.
Softkey
Response (Open)
Response (Short)
Step 4. Press
Step 5. Select a test port upon which an OPEN/SHORT response calibration will be performed.
Softkey
1
2
3
4
Step 6. According to the selection made in Step 3, connect an OPEN or SHORT calibration
standard to the test port (connector to which the DUT will be connected) selected in Step 5.
Figure 4-4
Connecting the standard at OPEN/SHORT Response Calibration
86
.
.
Calibrate
.
Select Port
Function
Displays softkeys for performing an open
response calibration (response calibration with
an OPEN standard).
Displays softkeys for performing a SHORT
response calibration (response calibration with
a SHORT standard).
Function
Selects port 1.
Selects port 2.
Selects port 3.
Selects port 4.
Chapter 4