Controlling E5091A
Connecting E5070A/E5071A and E5091A
Connecting E5070A/E5071A and E5091A
Required devices
The required devices to connect between the E5070A/E5071A and the E5091A are listed
below.
•
•
•
•
Connecting E5070A/E5071A and E5091A
As shown in Figure 13-1, connect the USB cable between the rear panel of the
E5070A/E5071A and that of the E5091A.
Figure 13-1
Connection between the E5070A/E5071A and the E5091A (rear view)
NOTE
Don't switch on/off devices connected using USB ports (both front and rear panels) and
connect/disconnect devices to the USB ports, while the E5070A/E5071A measures with
the E5091A.
270
E5070A/E5071A
E5091A
N-type to N-type cable (attached to the E5091A, Agilent part number: 8120-4782)
USB cable (attached to the E5091A, Agilent part number: 8121-0770)
13