Procedure - Agilent Technologies ENA Series User Manual

Calibration
Full 2-Port Calibration

Procedure

Figure 4-13 Connecting the Standard at Full 2-Port Calibration
Step 1. Press
Step 2. Press
Step 3. Press
Step 4. Press
Step 5. Select the test ports on which a full 2-port calibration will be performed.
Softkey
1-2
1-3
1-4
2-3
2-4
3-4
NOTE
In the procedure below, the selected test ports are denoted as x and y.
Step 6. Press
Step 7. Connect an OPEN calibration standard to test port x (the connector to which the DUT will
be connected) selected in Step 5.
94
.
.
Calibrate
.
2-Port Cal
.
Select Ports
Function
Selects test ports 1 and 2.
Selects test ports 1 and 3.
Selects test ports 1 and 4.
Selects test ports 2 and 3.
Selects test ports 2 and 4.
Selects test ports 3 and 4.
.
Reflection
Chapter 4