Selecting A Data Format - Agilent Technologies ENA Series User Manual

Selecting a Data Format

Use the following procedure to select a data format.
Step 1. Press (or
which the data format will be set.
Step 2. Press .
Step 3. Press the softkey that corresponds to the desired data format.
Softkey
Log Mag
Phase
Group Delay
-
Smith Lin / Phase
-
Smith Log / Phase
-
Smith Real / Imag
-
Smith R + jX
-
Smith G + jB
-
Polar Lin / Phase
-
Polar Log / Phase
-
Polar Real / Imag
Lin Mag
SWR
Real
Imaginary
Expand Phase
Positive Phase
Chapter 3
) and (or
Function
Selects the log magnitude format.
Selects the phase format.
Selects the group delay format.
Selects the Smith chart format (with linear magnitude and phase as the
marker response values).
Selects the Smith chart format (with log magnitude and phase as the
marker response values).
Selects the Smith chart format (with the real and imaginary parts as the
marker response values).
Selects the Smith chart format (with resistance and reactance as the
marker response values).
Selects the Smith chart format (with conductance and susceptance as
the marker response values).
Selects the polar format (with linear magnitude and phase as the marker
response values).
Selects the polar format (with log magnitude and phase as the marker
response values).
Selects the polar format (with the real and imaginary parts as the marker
response values).
Selects the linear magnitude format
Selects the SWR (standing wave ratio) format.
Selects the real format
Selects the imaginary format
Selects the expanded phase format
Selects the positive phase format
Setting Measurement Conditions
Selecting a Data Format
) to select the trace for
69