Using A Printer To Output The Screen Image; Available Printers (Supported Printers) - Agilent Technologies ENA Series User Manual

Using a Printer to Output the Screen Image

By connecting the printer to the printer parallel port or the USB port of the
E5070A/E5071A, you can print the screen information of the E5070A/E5071A.
NOTE When you want to use the printer by connecting it to the USB port, you need to register the
printer first. For more information, refer to "Registering the printer" on page 210.

Available printers (supported printers)

Table 9-2 shows the models of the available printers (supported printers) for the
E5070A/E5071A, the printer drivers you need to use, and the available ports of the
E5070A/E5071A as of April 2002.
For the latest information of the supported printers for the E5070A/E5071A, contact
Agilent Technologies. When contacting us, see the list of our customer centers at the end of
this manual.
Table 9-2 Supported printers (as of April 2002)
Manufacturer Model name
Hewlett-Packard DeskJet 930C
Hewlett-Packard DeskJet 940C
Hewlett-Packard DeskJet 948C
*1.The drivers for all supported printers at the time of shipment are installed in the E5070A/E5071A. If you use a
printer newly supported after purchasing the product, you need to install the printer driver for the printer in the
E5070A/E5071A. For more information on installation, refer to "Installing printer driver" on page 213.
Chapter 9
Using a Printer to Output the Screen Image
Printer driver you Available port
*1
need to use
HP Deskjet 930C Printer parallel port and USB port
HP Deskjet 940C Printer parallel port and USB port
HP Deskjet 948C Printer parallel port and USB port
Data Output
205