Setting and Using the Control and Management Functions
Configuring the Network
Step 7. The dialog box in Figure 12-9 appears.
To assign a specific IP address and subnet mask, select the
button within the
subnet mask into the
If an IP address can be obtained automatically (i.e., you can use the DHCP server), click
and select
gateway address in Step 8.
Figure 12-9
TCP/IP Properties Dialog Box ("IP Address" Tab)
Step 8. Select the
address in the
Figure 12-10
TCP/IP Properties Dialog Box ("Gateway" Tab)
256
tab and enter an IP address into the
IP Address
box (write them over the initial values).
Subnet Mask
Obtain an IP address automatically
tab. The dialog box in Figure 12-10 appears, enter a correct gateway
Gateway
box and press the
New gateway
Specify an IP address
IP Address
. In this case, it is not necessary to set a
button.
Add
option
box and a
Chapter 12