Installing Printer Driver - Agilent Technologies ENA Series User Manual

Installing printer driver

If you use a printer newly supported after purchasing the product, you need to install the
printer driver for the printer in the E5070A/E5071A.
Installation procedure
NOTE You need the mouse and the keyboard for this operation.
Step 1. Prepare the printer driver
i. Obtaining the printer driver
Obtain the printer driver for the E5070A/E5071A specific to the printer you want to
use.
Generally, you can download the printer driver from our product information web site
of the Agilent Technologies E5070A/E5071A.
For how to obtain the printer driver, contact Agilent Technologies. To contact us, see
the list of our customer centers at the end of this manual or Online assistance homepage
(http://www.agilent.com/find/assist).
CAUTION Installing a printer driver other than specified by Agilent Technologies may give
serous damage to the E5070A/E5071A.
• Never install the printer driver for printers that Agilent Technologies does not support.
• Except when instructed from Agilent Technologies, never install general printer drivers
that printer manufactures provide. When installing a general printer driver according to
the instruction from Agilent Technologies, be sure to install the driver of the specified
revision.
ii. Copy the printer driver you obtained onto a disk
When installing the printer driver from a floppy disk, copy the printer driver file you
obtained in a 3.5-inch floppy disk.
When installing the printer driver from the hard disk drive (D drive), network (mount)
the D drive of the E5070A/E5071A from the external computer and then, from the
external computer, copy the printer driver file you obtained in the D drive of the
E5070A/E5071A. For information on how to network the D drive, refer to "Accessing
to hard disk of the E5070A/E5071A from an external PC via LAN" on page 258.
Chapter 9
Using a Printer to Output the Screen Image
Data Output
213