Agilent Technologies ENA Series User Manual page 308

Measurement Examples
Evaluating a Duplexer
Step 2. Turn on the limit line and limit test for Trace 2.
Setup Description
Activating Trace 2
Limit Line: ON
Limit Test: ON
Step 3. Apply a trigger to execute the measurement.
Setup Description
Sweep Mode: Single
Figure 14-18 Limit Test Results
Step 4. Maximize the screen display of Trace 1 to examine its details.
Setup Description
Activating Trace 1
Maximizing the display of Trace 1
300
Key Operation
(Turn it )
Limit Line ON
(Turn it )
Limit Test ON
Key Operation
- (or
Single Continuous
Key Operation
)
Chapter 14