Printed/Saved Screen Image; Printing The Screen Image - Agilent Technologies ENA Series User Manual

Data Output
Using a Printer to Output the Screen Image

Printed/saved screen image

The screen image memorized in the volatile memory (clipboard) is printed/saved. Notice
that, if no image is memorized in the clipboard, the screen image at the execution is
printed/saved.
Memorizing the screen image to the clipboard
memorized to the clipboard.

Printing the screen image

Follow the procedure below to print the screen image.
Step 1. Connect a printer to the parallel port of E5070A/E5071A or USB port while the
E5070A/E5071A is on. Turn on the printer.
NOTE Do not connect printers other than those supported by the E5070A/E5071A. An incorrect
connection may cause the Add New Hardware wizard to be displayed on the screen. If this
happens, terminate the Add New Hardware wizard by clicking the
Step 2. Display the window to be printed.
Step 3. Press
printing.
Softkey
Print
Abort Printing
Printer Setup
Invert Image
206
captures the screen, i.e., the screen image at the time
to open the System menu. Use the softkeys displayed to complete the
is pressed is
Cancel
Function
Starts printing.
Aborts printing.
Allows the user to select and set up a printer.
Allows the user to print either with colors
closest to the screen display [OFF] or with
inverted colors [ON].
button.
Chapter 9