Number Of Channels And Channel Window Arrangement - Agilent Technologies ENA Series User Manual

Setting Measurement Conditions
Setting Up Channels and Traces

Number of Channels and Channel Window Arrangement

The number of channels to be displayed (up to nine channels) is automatically determined
by selecting the arrangement of channel windows on the screen. There are fourteen
patterns to select from (see Figure 3-2).
NOTE The execution of measurements does not depend on the display status of each channel
(measurements can be performed on channels that are not displayed). The user can set up
each channel for measurements (by selecting the sweep mode and the trigger source) from
the Chapter 5, "Making Measurements," on page 121.
Selecting the Number of Channels & Channel Window Arrangement
Step 1. Press
Step 2. Press
Step 3. Press the softkey that corresponds to the desired number of channels and channel window
arrangement.
Figure 3-2 Channel Window Arrangements
56
.
.
Allocate Channels
Chapter 3