Erasing The Frequency Labels; Labeling A Window - Agilent Technologies ENA Series User Manual

Setting Measurement Conditions
Setting Window Displays

Erasing the Frequency Labels

It is possible to set the analyzer so it does not show the frequency labels on the screen.
When using this function, the frequency information cannot be read without manipulating
the analyzer. Thus, this function provides an effective means of security.
Erasing the Frequency Labels
Step 1. Press
Step 2. Press
NOTE
Turning off the frequency display using the
display within the Stimulus softkey, which is turned on by pressing
pressing

Labeling a Window

It is possible to assign a unique name to a channel and display it on the screen. This feature
is useful in saving and/or printing measurement result for future reference.
Labeling a Window
Step 1. Press
Step 2. Press
Step 3. Press
The title label input dialog box (see Figure 3-12) appears.
Figure 3-12 Title Label Input Dialog Box
Step 4. Using keys that appear in the dialog box, type a label and press
Step 5. Press
The title will appear within a frame at the top of the channel window (title bar). (See Figure
3-13.)
Figure 3-13 Title Display
74
.
to turn off the frequency display.
Frequency
, and . The display of the softkey bar itself can be switched on or off by
.
or
.
.
Edit Title Label
to turn on the title display.
Title Label
key does not erase the frequency
Frequency
to select the channel to be labeled.
, ,
.
Enter
Chapter 3