Active Channel; Number Of Traces And Arrangement - Agilent Technologies ENA Series User Manual

Active Channel

The channel whose settings are being changed is called the active channel. The active
channel is displayed on the screen by highlighting its channel window. In order to change
settings unique to a particular channel, it is necessary to make the channel "active."
Use the following keys to select the active channel:
Hardkey

Number of Traces and Arrangement

Up to nine traces can be drawn for each channel. You can select an arrangement of graphs
within a channel window from the pre-defined patterns shown in Figure 3-3.
Traces are displayed based on the order determined from the graph arrangement currently
being used.
NOTE If the number of traces is less than the number of graphs, nothing will be displayed in the
extra area(s). If the number of traces is more than the number of graphs, the remaining
traces will be displayed by going back to the first graph, overlapping existing traces. For
example, if
there are five traces to display, then Trace 1 and Trace 4 share Graph
Trace 5 share Graph
Selecting the Number of Traces and Graph Arrangement
Step 1. Press
arrangement will be set.
Step 2. Press
Step 3. Press
Step 4. Select the number of traces from
Step 5. Press
Step 6. Press the softkey that corresponds to the desired graph arrangement. (See Figure 3-3.)
Chapter 3
Function
Selects the next channel by incrementing the channel number.
Selects the previous channel by decrementing the channel number.
is selected from the graph arrangement shown in Figure 3-3 and
. Graph
Gr2 Gr3
or
.
.
Number of Traces
1
.
Allocate Traces
Setting Measurement Conditions
Setting Up Channels and Traces
displays only Trace 3.
to select the channel in which the number of traces and
to .
9
, and Trace 2 and
Gr1
57