Fixture Simulator
Evaluating Balanced Devices (balance-unbalance conversion function)
Evaluating Balanced Devices (balance-unbalance conversion
function)
The balance-unbalance conversion function simulates a measurement under a balanced
state based on measurement results obtained in an unbalanced state (Figure 7-6). This
function enables you to evaluate devices with balanced ports.
Figure 7-6
Balance-unbalance conversion
The types of devices that can be evaluated using the E5070A/E5071A are shown in Figure
7-7.
NOTE
To evaluate a balanced device, an E5070A/E5071A with at least three test ports (option
313, 314, 413, or 414) is required.
158
Chapter 7