Agilent Technologies ENA Series User Manual page 428

Softkey Functions
Calibration Menu
Key Operation
(Continued)
ECal
Display softkeys for executing a THRU ECal.
Thru ECal
Executes a THRU ECal for test port 1®2.
2-1 (S21)
*1 Executes a THRU ECal for test port 1®3.
3-1 (S31)
*2 Executes a THRU ECal for test port 1®4.
4-1 (S41)
Executes a THRU ECal for test port 2®1.
1-2 (S12)
*1 Executes a THRU ECal for test port 2®3.
3-2 (S32)
Executes a THRU ECal for test port 2®4.
*2
4-2 (S42)
Executes a THRU ECal for test port 3®1.
*1
1-3 (S13)
Executes a THRU ECal for test port 3®2.
*1
2-3 (S23)
*2 Executes a THRU ECal for test port 3®4.
4-3 (S43)
*2 Executes a THRU ECal for test port 4®1.
1-4 (S14)
*2 Executes a THRU ECal for test port 4®2.
2-4 (S24)
Executes a THRU ECal for test port 4®3.
*2
3-4 (S34)
Returns to the softkey display screen one level higher.
Return
Enables or disables isolation calibration.
Isolation
Returns to the softkey display screen one level higher.
Return
Enables or disables the display of calibration properties. When
Property
enabled, calibration status information between test ports will be
displayed in a matrix format in the lower-right corner of the
channel window.
Displays softkeys for selecting calibration kits. Up to ten calibration kits may be defined. Calibration kits 85033E,
Cal Kit
85033D, 85052D, 85032F, and 85032B are pre-defined with default settings.
Selects calibration kit 85033E.
85033E
Selects calibration kit 85033D.
85033D
Selects calibration kit 85052D.
85052D
Selects calibration kit 85032F.
85032F
Selects calibration kit 85032B.
85032B
Selects a user-defined calibration kit.
User
Selects a user-defined calibration kit.
User
Selects a user-defined calibration kit.
User
Selects a user-defined calibration kit.
User
Selects a user-defined calibration kit.
User
Returns to the softkey display screen one level higher.
Cancel
Displays softkeys for changing the definition of the calibration kit
Modify Cal Kit
selected in the
Displays softkeys for defining the standard for a calibration kit. The label
Define STDs
the name of each standard. As a default setting, undefined standards are tagged with a
standards may be defined.
Displays softkeys for changing the definition of
1. (Std Name)
Defines the name of the standard No.1. Once named, the new name
Label
will appear as a label for the corresponding softkey, which is
represented as
420
Function
menu.
Cal Kit
in this manual.
(Std Name)
:SENS{1-9}:CORR:COLL:ECAL:THRU 2,1
:SENS{1-9}:CORR:COLL:ECAL:THRU 3,1
:SENS{1-9}:CORR:COLL:ECAL:THRU 4,1
:SENS{1-9}:CORR:COLL:ECAL:THRU 1,2
:SENS{1-9}:CORR:COLL:ECAL:THRU 3,2
:SENS{1-9}:CORR:COLL:ECAL:THRU 4,2
:SENS{1-9}:CORR:COLL:ECAL:THRU 1,3
:SENS{1-9}:CORR:COLL:ECAL:THRU 2,3
:SENS{1-9}:CORR:COLL:ECAL:THRU 4,3
:SENS{1-9}:CORR:COLL:ECAL:THRU 1,4
:SENS{1-9}:CORR:COLL:ECAL:THRU 2,4
:SENS{1-9}:CORR:COLL:ECAL:THRU 3,4
:SENS{1-9}:CORR:COLL:ECAL:ISOL
:SENS{1-9}:CORR:PROP
:SENS{1-9}:CORR:COLL:CKIT 1
:SENS{1-9}:CORR:COLL:CKIT 2
:SENS{1-9}:CORR:COLL:CKIT 3
:SENS{1-9}:CORR:COLL:CKIT 4
:SENS{1-9}:CORR:COLL:CKIT 5
:SENS{1-9}:CORR:COLL:CKIT 6
:SENS{1-9}:CORR:COLL:CKIT 7
:SENS{1-9}:CORR:COLL:CKIT 8
:SENS{1-9}:CORR:COLL:CKIT 9
:SENS{1-9}:CORR:COLL:CKIT 10
CALC{1-9}:SEL:FORM SCOM
(Std Name)
.
1. (Std Name)
:SENS{1-9}:CORR:COLL:CKIT:STAN1:LAB
SCPI Command
on each softkey represents
label. Up to 21
No Name
Appendix D