Xy-Distance Accuracy - MUTOH SC-PRO User Manual

Sign cutting plotter

Hide thumbs Also See for SC-PRO:

Table of Contents

5.5 XY-DISTANCE ACCURACY

The XY - Distance Accuracy tests are developed to check the actual X-Y cutting distance with the sent

vector data.

Please follow the procedure below to make the test:

Step 1 :

Open Mutoh's CutServer

Step 2 :

Select which test to perform.

Step 3 :

Select the appropriate COM-port and double-click.

Step 4 :

Load a roll or sheet with at least the measurements indicated in the dropdown menu.

Step 5 :

Load a knife.

Step 6 :

A box will be cut.

Step 7 :

Peel out the box.

Step 8 :

Measure the X length and Y width and enter them. Be sure to enter the values in mm!

Step 9 :

If the correct values have been entered, the following message will appear and the test will be

done.

User's Guide SC-PRO Cutting Plotter

CHAPTER 4 : WALKTHROUGH THE OPERATION PANEL

AP-75280 – Rev. 1.1

Table of Contents