Servo Motor Power Supply Connector Wiring Method - Mitsubishi Electric MDS-E Series Instruction Manual

MDS-E/EH Series Instruction Manual
2 Wiring and Connection

2.2.3 Servo Motor Power Supply Connector Wiring Method

(1) Connector configuration
< Applicable cable example >
Cable finish OD：to
Axis name Connector model name
L axis CNU01SEL (AWG14)
M axis CNU01SEM (AWG14)
S axis CNU01SES (AWG14)
Common CNU01SEF (AWG14)
POINT
The servo motor power supply connector is equipped with an anti-misinsertion mechanism, and can be connected only to
the power supply output of each certain axis. The connector without the anti-misinsertion mechanism (CNU01SEF
(AWG14)) can be connected to the power supply output of all axes.
(2) Power supply unit power supply connectors (Only for MDS-E-CV-37/75)
< Applicable cable example >
Cable finish OD：to
Axis name Connector model name
For CV CNU01SECV (AWG14)
IB-1501229-F
Connector for L axis
7.8mm
Connector for M axis
Connector for S axis
Applicable cable
Insulator
Size outer
dimension
AWG16 to 8 7.8mm or less
7.8mm
Applicable cable
Insulator
Size outer
dimension
AWG16 to 8 7.8mm or less
60
CNU01SEL
CNU01SEM
CNU01SES
Strip length Connection
[mm]
12mm J-FAT-OT-P
(MDS-E-CV-37/75 only)
Connector for CV
CNU01SECV
Strip length Connection
[mm]
12mm J-FAT-OT-P
Drive unit
(for 3-axis)
(For L axis)
(For M axis)
(For S axis)
Manufacturer
lever
J.S.T
Power supply unit
Manufacturer
lever
J.S.T