External Power Supply Unit - Mitsubishi Electric M70V Series Connection Manual

2.8 External Power Supply Unit

Item
Input power voltage
Output current
Dimension
Mass
Output holding time
(Note 1) PD25 will not be turned ON by the ON/OFF switch immediately after the power OFF. Wait at least 2
seconds, and then turn the power ON.
(Note 2) The power supply configuration for NC devices depends on the machine. Appropriate circuit protector
must be selected by machine builder according to the load of the machine.
(Note 3) PD25 does not comply with 100VAC.
Dimension and names of parts
[PD25]
65
AC IN
ON/OFF SW
ON/OFF
FAN ALARM
POWER
DC OUT
6
6
30
<Mounting direction and clearance>
Mount the external power supply unit vertically and so that it is visible from the front. Provide space for heat
dissipation and ventilation.
100mm
20mm
100mm
PD25
200 to 230VAC
+10%-15%
50/60Hz ± 1Hz
3A
130mm × 65mm × 230mm
1.5kg
300ms
(1)
(3)
(4)
(5)
130
20mm
M70V Series Connection Manual
2.8 External Power Supply Unit
65