Display Items For The Power Supply Unit; Display Items For The Auxiliary Axis Unit [700 Series Only] - Mitsubishi Electric 700 Series Training Manual
Hide thumbs
Also See for 700 Series:
- Instruction manual (242 pages) ,
- Programming manual (183 pages) ,
- Installation manualline (43 pages)
Table of Contents
Advertisement
5. Diagnosis Screens
5.4.3 Display Items for the Power Supply Unit
The various data related to the power supply is monitored.
Change the display items using the
5.4.4 Display Items for the Auxiliary Axis Unit
"Auxiliary axis unit" appears only when there is one or more valid auxiliary axis. (Base common parameter
"#1044 auxno" is "1" or more).
The various data related to the auxiliary axis (MR-J2-CT) servo control is monitored.
For reference, change the display items using the
Data for the number of axes (up to four) set with the base common parameter "#1044 auxno (No. of
connected MR-J2-CT units)" is displayed.
key and
key to refer to the data.
key and
218
5.4 Drive Monitor Screen
key.
Advertisement
Table of Contents
