Mitsubishi Electric MDS-E Series Instruction Manual page 362

MDS-E/EH Series Instruction Manual
6 Spindle Adjustment
(4) Acceleration/deceleration adjustment
Checks acceleration waveform and adjusts deceleration time.
(a) Checking acceleration waveform
Check acceleration waveform
Set the "Time-series data
measurement" with NC Analyzer
as shown on the right
Acceleration/deceleration
operation
Acceleration waveform
check completed
< NC Analyzer setting (Time-series data measurement) >
Get Waveform type
Speed feedback (r/min)
CH1
CH2 Current feedback
Perform acceleration/deceleration operation from the
maximum rotation speed in 1000 rotations increments.
Acceleration time
331
Speed feedback
Current feedback
IB-1501229-F