Installation Of Servo Motor; Environmental Conditions - Mitsubishi Electric MDS-E Series Instruction Manual

MDS-E/EH Series Instruction Manual
1 Installation

1.1 Installation of Servo Motor

CAUTION
1. Do not hold the cables, axis or encoder when transporting the motor. Failure to observe this could lead to faults or
injuries.
2. Securely fix the motor to the machine. Insufficient fixing could lead to the motor deviating during operation. Failure to
observe this could lead to injuries.
3. When coupling to a servo motor shaft end, do not apply an impact by hammering, etc. The encoder could be damaged.
4. Never touch the rotary sections of the motor during operations. Install a cover, etc., on the shaft.
5. Do not apply a load exceeding the tolerable load onto the servo motor shaft. The shaft could break. Failure to observe
this could lead to injuries.
6. Do not connect or disconnect any of the connectors while the power is ON.

1.1.1 Environmental Conditions

Environment
Ambient temperature
Ambient humidity
Storage temperature
Storage humidity
Atmosphere
Altitude
IB-1501229-F
Conditions
0°C to +40°C (with no freezing)
80% RH or less (with no dew condensation)
-15°C to +70°C (with no freezing)
90% RH or less (with no dew condensation)
Indoors (no direct sunlight)
No corrosive gas, inflammable gas, oil mist or dust
Operation / storage: 1000m or less above sea level
Transportation: 10000m or less above sea level
2