Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 620

COPIER (Service mode for printer) > ADJUST (Adjustment mode) > CCD
MTF-M5 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Amount of Change per
Unit
MTF-M6 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Amount of Change per
Unit
MTF-M7 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Default Value
Related Service Mode
Amount of Change per
Unit
MTF value 5 entry: horz scan, back side
To enter the setting value 5 for calculating MTF filter coefficient in horizontal scanning direction of
the Scanner Unit (for back side).
Enter the value of service label on the Reader.
- When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-related RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
20 to 85
50
COPIER> FUNCTION> CCD> MTF-CLC
1
MTF value 6 entry: horz scan, back side
To enter the setting value 6 for calculating MTF filter coefficient in horizontal scanning direction of
the Scanner Unit (for back side).
Enter the value of service label on the Reader.
- When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-related RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
20 to 85
50
COPIER> FUNCTION> CCD> MTF-CLC
1
MTF value 7 entry: horz scan, back side
To enter the setting value 7 for calculating MTF filter coefficient in horizontal scanning direction of
the Scanner Unit (for back side).
Enter the value of service label on the Reader.
- When replacing the Scanner Unit
- When replacing the Main Controller PCB/clearing the Reader-related RAM data
1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
20 to 85
50
COPIER> FUNCTION> CCD> MTF-CLC
1
598
8. Service Mode