Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 581

COPIER (Service mode for printer) > DISPLAY (State display mode) > ACC-STS
SORTER 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
CARD 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
RAM 1
Detail
Use Case
Adj/Set/Operate Method
Unit
COINROBO 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
NETWARE 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
HDD 1
Detail
Use Case
Adj/Set/Operate Method
MN-RAM 1
Detail
Use Case
Adj/Set/Operate Method
Unit
Connect state of Finisher-related option
To display the connection state of Finisher-related options.
When checking the connection of Finisher-related options
N/A (Display only)
Left column (connection state of Finisher-related options): 1 to 5
1: Without Saddle
2: With Saddle
3 to 5: Not Used
Right column (connection state of Finisher-belonged Puncher): 0 to 4
0: No hole, 1: 2-hole, 2: 2/3-hole, 3: 4-hole, 4: 4-hole (SW)
Dspl of connection state of Card Reader
To display the connecting state of Card Reader.
When checking the connection between the machine and the Card Reader
N/A (Display only)
0 to 1
0: No card is inserted while the Card Reader is connected. (Copy is not available.)
1: Card Reader is not connected, or card is inserted while the Card Reader is connected. (Copy
is available.)
Dspl of image processing memory capacity
To display the capacity of memory for image processing on the Main Controller PCB.
When checking the memory capacity of the machine
N/A (Display only)
MB
Dspl of Coin Manager connection state
To display the connecting state of the Coin Manager.
When checking the connection between the machine and the Coin Manager
N/A (Display only)
0 to 1
0: Not connected, 1: Connected
Install state dspl of NetWare firmware
To display the installation state of the NetWare firmware.
When checking whether NetWare firmware is installed to the machine
N/A (Display only)
0 to 1
0: Not installed, 1: Installed
Display of HDD model name
To display the model name of HDD.
When checking the model name of HDD used on the machine
N/A (Display only)
Display of memory capacity for system
To display the capacity of memory for system on the Main Controller PCB.
When checking the memory capacity of the machine
N/A (Display only)
MB
559
8. Service Mode