Removing The First Delivery Unit - Canon imageRUNNER ADVANCE C3500 III Series Service Manual

2. Remove the link by pulling the Lever Assembly (Rear) [2] toward the outside at the position [A] of the Stopper Rail and
opening the door.
NOTE:
• Bend the [A] part when removing the Lever Assembly (the figure shows the Stopper Rail on the rear side).
• Pull the Lever Assembly (Front and Rear) toward the outside at the position [B].
8. Remove the Right Door [1].
• 2 Bosses [2]
NOTE:
When the consumable parts have been replaced, be sure to clear the parts counter shown below in service mode.
• COPIER > COUNTER > DRBL-1 > R-DOOR
REG-RL/ M-PU-RL/ M-SP-RL/ M-FD-RL is also cleared at the same time when R-DOOR is cleared.

Removing the First Delivery Unit

■ Preparation
1. Fully open the Right
2. Remove the Right Cover (Rear Upper).
[A]
[1]
[2]
Door."Fully open the Right Door" on page 154
4. Parts Replacement and Cleaning
[A]
[A]
[B] [B]
[2]
[1]
255
[2]