Table of Contents
Advertisement
End
CAUTION:
Numbers in the Flow Chart 2 are corresponding to the procedure numbers. Check the remedy procedure by referring to
the flow chart.
1. Check cable connector connected to the hard disk and restart the machine.
2. Check if the machine is started normally. If the machine is started normally, the analysis is complete.
Start
(1) Check cable connector
connected to HDD and restart
the machine.
(2) Did
YES
the machine start and
the issue solved?
NO
(3) Shift to the hard disk
maintenance mode.
(4) Is the
issue judged to be unsolvable
YES
by hard disk maintenance
mode?
NO
(5) Specify target area
(CHK TYPE)
(6) Schedule the process
to conduct, turn OFF and
then ON the main power.
(7) Scheduled process
is conducted.
(8) Did
NO
the machine start and
issue solved?
YES
Flow Chart 2
301
Confirmation or judgment
Detail change of
initialization and
/or Inspection
Initialization and /or
inspection fails and
related parts are replaced
Automatic process
of the machine
YES
(9) Cancel the scheduled
process and turn OFF
the power.
(10) Replace related parts.
6. Troubleshooting
Advertisement
Table of Contents
Troubleshooting
