Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 953

FEEDER (ADF service mode) > FUNCTION (Operation / inspection mode)
TRY-LTR 1
Detail
Use Case
Adj/Set/Operate Method
TRY-LTRR 1
Detail
Use Case
Adj/Set/Operate Method
FEED-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
CL-CHK 1
Detail
Use Case
Adj/Set/Operate Method
Display/Adj/Set Range
Related Service Mode
CL-ON 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Related Service Mode
Adj of DADF Tray width detect ref 1: LTR
To automatically adjust the paper width detection reference point 1 for the DADF Original Pickup
Tray. (LTR)
- When installing DADF
- When replacing the Main Controller PCB/clearing the Reader-related RAM data
Select the item, and then press OK key.
Adj of DADF Tray width detect ref2: LTRR
To automatically adjust the paper width detection reference point 2 for the DADF Original Pickup
Tray. (LTRR)
- When installing DADF
- When replacing the Main Controller PCB/clearing the Reader-related RAM data
Select the item, and then press OK key.
Specify DADF individual feed operation
To specify the feed mode for DADF.
Feed operation is activated by FEED-ON.
At operation check
Enter the setting value, and then press OK key.
0 to 3
- DADF (1-path model)
0: 1-sided pickup/delivery operation, 1: Not used, 2: 1-sided pickup/delivery operation (with stamp),
3: Not used
- DADF (reverse model)
0: 1-sided pickup/delivery operation, 1: 2-sided pickup/delivery operation, 2: 1-sided pickup/
delivery operation (with stamp), 3: 2-sided pickup/delivery operation (with stamp)
FEEDER> FUNCTION> FEED-ON
Specifying DADF Operation Clutch
To specify the DADF Clutch to be operated.
The Clutch is activated by CL-ON.
At operation check
Enter the setting value, and then press OK key.
0 to 1
- DADF (1-path model)
0: Pickup Clutch (CL1), 1: Not used
- DADF (reverse model)
0: Pickup Clutch (CL1), 1: Registration Clutch (CL2)
FEEDER> FUNCTION> CL-ON
Operation check of DADF Clutch
To start operation check of the clutch specified by CL-CHK.
At operation check
1) Select the item, and then press OK key.
The clutch operates for approximately 5 seconds and automatically stops.
2) Press OK key.
The operation check is completed.
Be sure to press the OK key again after execution. The operation automatically stops after
approximately 5 seconds, but is not completed unless the OK key is pressed (STOP is not
displayed).
FEEDER> FUNCTION> CL-CHK
931
8. Service Mode