Canon imageRUNNER ADVANCE C3500 III Series Service Manual page 922

COPIER (Service mode for printer) > COUNTER (Counter mode) > MISC
HDD-ON 1
Detail
Use Case
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
SUC-A-Y 2
SUC-A-M 2
SUC-A-C 2
SUC-A-K 2
FIN-PTH 1
FR-STPL 1
MSTP-B 1
MSTPL 1
STPL-2P 1
STPL-F 1
STPL-R 1
SWG-RL 1
FIN-RBLT 1
■ JOB
COPIER (Service mode for printer) > COUNTER (Counter mode) > JOB
DVPAPLEN 1
DVRUNLEN 1
■ DRBL-1
COPIER (Service mode for printer) > COUNTER (Counter mode) > DRBL-1
TR-UNIT 1
Detail
Use Case
Adj/Set/Operate Method
Caution
Display/Adj/Set Range
Unit
Default Value
Amount of Change per
Unit
Number of hard disk start-up times
To count up when power of the hard disk is turned ON.
When judging whether to shift the machine to power-saving state after using the printer or scanner
for a job
0 to 99999999
time
0
1
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
For R&D
ITB Unit parts counter
ITB Unit
1st line: Total counter value from the previous replacement
2nd line: Estimated life value
When checking the consumption level of parts/replacing the parts
To clear the counter value: Select the item, and then press Clear key.
To change the estimated life value: Select the item, enter the value, and then press OK key.
Clear the counter value after replacement.
0 to 99999999
sheet
0
1
900
8. Service Mode